Autowatch Ghost II Immobiliser Review
Autowatch Ghost is the latest technology in car security. It is inaccessible to thieves and is impossible to start without either a unique pin code or app authorization.
The system is based on the CAN Data network, and is completely silent so cannot be identified by common thieves' radio signals or diagnostic tools. It does not require any circuit cuts to be made before installing.
What is a ghost immobiliser?
A Ghost Immobiliser is a gadget that helps to protect your car against theft, by blocking the engine from starting until you enter a unique pin code. It can be used on a wide range of vehicles. And, unlike the standard vehicle immobiliser it doesn't require an ID card or key to operate. It is also difficult to bypass or hack, and it operates in a quiet manner. This means that a thief will need to be quick to get away without being noticed.
It guards against signal jamming, spoofing and key cloning - all methods thieves have used to unlock vehicles equipped with standard immobilisers. The device stops thieves from stealing keys by fishing in your mailbox or entering your home and stealing the remote control. The device is able to stop thieves from driving off your pride and joy even if they manage to get the key. It will stop the vehicle from operating until they enter the code.
Ghost immobilisers, unlike passive immobilisers which require a fob or key to be in use to activate them and is designed to be fully sealed within the engine. It is connected directly to the CAN data circuit of the vehicle. The system generates the pin code by pressing buttons on the steering wheel or the console of your vehicle. You will have to enter this code before your engine can start. The system can be put into an operating mode that allows your car to start and drive for short periods of time without the need for the use of a PIN. However, the service mode will be terminated depending on speed and time.
As a result of the technology employed, it is unable to be bypassed or hacked, even with the use of high-tech equipment such as RF scanning or code grabbing devices. It is also impossible to disable with a regular vehicle immobiliser because it doesn't send a signal as a standard immobiliser does and works only by connecting directly to the CAN data circuit.
TASSA (Tracking and Aftermarket Security System Association) has approved Ghost's immobiliser as an insurance-approved product due to its high-end technology and ease-of-installation. We are a proud TASSA approved Ghost installer and can fit the device into your vehicle for insurance purposes.
How does the Ghost Immobiliser Work?
In simple terms, an immobiliser functions by preventing your vehicle from starting if the wrong key or fob is used. This is accomplished by sending a code to your vehicle's ECU (Engine Control Unit) If this code is sent from the incorrect fob or key the ECU will not recognize it and, consequently your car will not start. This is the reason it's essential to ensure that your vehicle is equipped with an immobiliser from an approved and reputable professional.
MotorGuard is the Midlands' most trusted security expert for vehicles and installer. We provide an Autowatch Ghost immobiliser fitting service for a broad selection of modern cars, so you can rest at ease knowing that your prized possession is protected against potential thieves.
The Autowatch Ghost immobiliser is one of the first aftermarket CAN bus immobiliser systems and protects your vehicle against key-cloning, hacking and theft. It is designed to be able to remain undetectable by car burglars because it does not use LED indicators or key-fobs. It can also be hidden within your vehicle's wiring so that no additional hardware is required.
Once it is installed the system is connected to the CAN system in your vehicle and lets you create an individual disarm sequence using your own pin code which you have to enter to operate the vehicle. This pin code is up to 20 presses in length, to provide additional security. Should you forget your pin number, or if a button has become broken, the device features an emergency pin code that can be used to reset the button and allow your vehicle to begin again.
The fact that the Ghost immobiliser can't be manipulated or hackable is what makes it an effective deterrent to thieves. It also TASSA (Tracking and Aftermarket Security Systems Association) which can reduce the cost of your car insurance.
Ghost immobilisers continue to evolve as technology improves. In this regard, we suggest contacting an Autowatch Ghost immobiliser fitting service as soon as possible to ensure that your pleasure is completely protected. We can provide you with quality service whether you are purchasing an entirely new car or upgrading your current vehicle.
Is a Ghost Immobiliser compatible with my car?
The Ghost is the first aftermarket CAN bus immobiliser to provide total protection against modern-day vehicle theft. It provides protection against key cloning and vehicle hacking, as well as ECU swapping. The new TASSA-verified Ghost-II system also allows vehicle marking, linking to the International Security Register and enabling your insurance company to confirm that you have an Ghost system installed.
Our Ghost Immobiliser prevents theft by making it necessary for an individual pin code be entered, or your phone to be equipped with our Autowatch Application installed. It functions just like a pin code for a bankcard and makes it impossible for thieves to drive away with your pride and Joy without logging in the correct pin or phone. The Ghost Immobiliser System integrates into the CAN Data Network, so no wire cutting is needed and it operates quietly. It is invisible to thieves and can't be detected by sophisticated scans using RF or code-grabbing techniques that other systems employ.
The Autowatch app is used to connect the Ghost to your smartphone. This allows you to enter an indefinite 'Service or valet' mode that deactivates the ghost for up to 30 minutes while you give your vehicle to service or transport. It is then connected to your smartphone using the Autowatch app to allow you to switch into a temporary 'Service or Valet' mode that deactivates the ghost for up to 30 minutes whilst you transfer your vehicle for repair or transport.
It is no surprise that the number of stolen vehicles has increased significantly. This is because of the extensive customization and personalisation that is used in modern cars as well as the fact that many of us drive older vehicles. Many of these are costly and rare vehicles which can take months to repair after being stolen. Hence, making sure that your car isn't in danger of becoming the next target is essential. Ghost immobilisers are an affordable investment that can keep your vehicle safe and even be used to recover the vehicle should it be stolen.
Does a Ghost Immobiliser operate on the cut principle?
ghost immobiliser near me stop the engine of your car from starting unless a second PIN is entered alongside your key fob. This prevents thieves from cloning your keys to steal into your car's system and could encourage thieves to leave your vehicle alone.
Once installed your ghost immobiliser generates a unique pincode of up to twenty digits, which you can enter using the buttons on your vehicle (steering wheels, centre consoles or door panels). This code must be entered to start your vehicle. The code sequence must be entered every time you drive your car, similar to a PIN password on credit cards. This code can be easily reset by entering a number sequence in the Ghost app.
The Autowatch Ghost II CAN has two deactivation mode for valet and services, that allow you to temporarily start your car with no access code - like keys fobs - while it is in the garage or parked at valet parking. The immobiliser will then reactivate automatically when your car is parked.
In contrast to other security systems on the market and in comparison to other security devices, the Ghost is completely undetectable by modern thieves as it doesn't feature any LED indicators and operates in a silent manner using your vehicle's CAN data network. It's also not vulnerable to the same circuit cuts that other security systems are as it does not use radio signals.
As a result, it is able to be installed in a way that's discreet and hidden from view and therefore is difficult for thieves to locate and detect. It is also not detected by sophisticated scanning tools and code grabbing technologies that are commonly employed to detect or disable security devices.
The Ghost is a premium, state-of-the-art immobiliser on the CAN bus that gives the best security against key cloning, relay theft, and car hacking. It's easy to install and is inaccessible to thieves. It is not able to be deactivated with simple wire cutting. This makes it a must-have for any driver who wants to protect their vehicle.